Tiếng Việt 
English 
Thiết bị đo lường điện
Máy cấp và phân tích Nguồn điện
Thiết bị phân tích tín hiệu
Thiết bị đo môi trường
Thiết bị đo chính xác
Thiết Bị Viễn Thông
Thiết bị cơ khí chính xác
Thiết bị - Vật tư nhà máy
Thiết bị đào tạo - thực hành
Thiết Bị SMT
Sản phẩm khác
Hệ thống Sạc Pin máy bộ đàm
-
Loại pin kiểm tra:
- Vui lòng liên hệ để kiểm tra tình trạng kho
- Tạm thời chưa có khuyến mãi cho sản phẩm này
Hotline: 0906.988.447
Liên hệ: Hồ Chí Minh
- Điện thoại: (028).3977.8269
- Email: sales@lidinco.com
- Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM
Liên hệ: Bắc Ninh, Hà Nội
- Điện thoại: (0222).730.0180
- Email: bn@lidinco.com
- Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
-
Tư vấn kĩ thuật
Miễn phí
-
Miễn phí vận chuyển
Đơn hàng trên 3 triệu
Dữ liệu đang được cập nhật
Giới thiệu Hệ thống Sạc Pin máy bộ đàm
Hệ thống Sạc Pin máy bộ đàm
- Sạc được nhiều máy bộ đàm cùng lúc
- Sạc nhanh chóng
- Hệ thống sạc bền bỉ
DURO A1 SINGLE-BAY BATTERY CHARGER
This compact single-bay charger services lithium and nickel based battery packs. The external 18-watt AC power supply provides 15 watts of charge power per bay. Charge time is 2-3 hours, depending on battery size.
Part Number: 11-403-0100 |
DURO A5 MULTI-BAY BATTERY CHARGER
 | Has a 90-watt external AC power supply to provide 15 watts of charge power per bay. Charge time is 2-3 hours, depending on battery size.
Part Number: 11-403-0500 |
DURO B1 SINGLE-BAY BATTERY CHARGER
 | Charges SMBus and non-SMBus batteries. A 30-watt external AC power supply provides 27 watts of charge power per bay for a charge time of 2-3 hours on most batteries.
Part Number: 11-403-0120 |
DURO B5 MULTI-BAY BATTERY CHARGEr
 | Similar to B1 with 5 bays for simultaneous service of 5 batteries; includes battery calibration & conditioning function on bays 1 and 2. A 150-watt external AC power supply provides 27 watts of charge power per bay.
Part Number: 11-403-0520 |
HOT AND COLD CHARGING
Advanced charge techniques guarantee full state-of-charge and safe operation even under adverse conditions. Below 0C (32F), the Duro applies a trickle charge to warm up the nickel-based battery, then switches to fast-charge on reaching operating temperature. A charge time-out timer prevents a prolonged charge at low temperature. For safety reasons, lithium-ion does not charge below 5C (41F). Above 50C (123F), the Duro allows the battery to cool down to 45C (113F) before taking on a charge or resuming from a previous charge. Should the temperature remain high, a time-out timer terminates the battery with a fail indication. Preventing charge at high temperatures protects battery and equipment and achieves optimal safety. * Temperature sensing requires a thermistor in the battery or in the adapter |
FULL-CHARGE TERMINATION
| The termination methods of nickel-based batteries are based on negative delta V, plateau timer and dT/dt. Lithium-ion terminates on a current saturation. Redundant detection methods provide safe charging, even if the battery is known to be defective. |
TRI-CHEMISTRY SELECTION
The user often has the choice of utilizing nickel or lithium-based batteries. Duro adapters automatically detect the battery type and select the correct charge algorithm. Nickel and lithium-based batteries can be charged in the same adapter.* * Only for batteries with usable identification code |  |
ACTIVE CHARGE OPERATION
| Operators often require monitoring voice traffic while the radio is in the charger. The Duro makes this possible by applying a topping charge after energy has been dispensed. With the Duro charger, a two-way radio can in essence become a base station. |  |
SIGNAL INDICATORS
| Two light signals indicate charging, ready and fail status. Fail denotes a battery that is shorted, unable to follow the predicted voltage pattern or other anomalies. A fail condition terminates service to protect the battery and charger and alerts the user with a flashing red LED. |  |
REACTIVATING LITHIUM-ION BATTERIES
| When discharged too low, some lithium-ion batteries appear dead and cannot be recharged. The Duro charger recognizes this condition and reactivates the pack’s safety circuit with charge pulses. On reaching normal voltage, a fast-charge completes the charge. |  |
CONDITIONING / CALIBRATION DISCHARGE
| Bay 1 and 2 of the Duro B5 are equipped with discharge circuits. This feature reverses memory on nickel-based batteries and calibrates SMBus packs. Batteries in constant use should be serviced once every 1-3 months to prolong battery life and retain an accurate digital readout. The B5 recognizes the need for calibration by flashing the red LED for 15 seconds. |  |
CHARGES SMBUS BATTERIES
| The Duro B-system services SMBus batteries by communicating with the internal battery flags and resetting the state-of-charge indicator on full charge. |  |
IN-VEHICLE MOUNTING
| The Duro chargers can be installed in a vehicle to service 3.6 to 7.2 volts batteries. Higher voltage batteries can be serviced by adding a third-party external DC-to-DC converter. Cadex offers several mounting options that allow horizontal or vertical mounting. Typical charger locations are the transmission hub, firewall, trunk floor and the wall in a truck. The installation is quick and simple. |
Thông số kỹ thuật
| Duro A1 | Duro A5 | Duro B1 | Duro B5 | |
| System | 1-bay quick-charger for regular batteries | 5-bay quick-charger for simultaneous charge of 5 batteries | 1-bay quick-charger for SMBus batteries; also charges regular batteries | 5-bay quick-charger for simultaneous charge of 5 regular and SMBus batteries |
| Battery interface | The chargers are factory configured for the battery type. Customer specified. | |||
| Chemistries | Nickel-cadmium (NiCd), nickel-metal-hydride (NiMH) and lithium-ion (Li-ion). | |||
| Charge protocol | Nickel-based: Constant current; charge termination: dT/dt (rate-of-temperature increase); 1°C/min. rise, NDV 8-10mV/cell; plateau timer; trickle charge of 0.05C when ready. Lithium-based: Constant voltage, current limit; charge termination on current drop to 0.05C. | |||
| Temperature management | Nickel-based: Trickle charge if below 0°C, normal charge when warm Lithium-based: No charge if below 5°C, resumes charge when warm No charge for all chemistries above 50°C; resumes when cooled down to 45°C. | |||
| Battery mAh/V | 500mAh - 8000mAh | |||
| Low-V version High- V version | 3.60 - 7.20V 8.40 - 14.40V | 3.60 - 7.20V 8.40 - 14.40V | Special order 9.60 - 14.40V | Special order 9.60 - 14.40V |
| Charge time | Nickel-based chemistries: 90 minutes typical; longer on larger batteries Lithium-based chemistries: 3h typical; longer on larger batteries | |||
| Discharge power | Not available | Not available | Not available | 1A, 15W max each for bays 1 & 2 |
| Light signals | Charging: Flashing green Ready: Solid green Fail: Solid red | Same, red/green discharging; flashing red hint to calibrate | ||
| Electrical | 18 watts external AC power adapter, (90-250 VAC, 47-63 Hz) | 90 watts external AC power adapter, (90-250 VAC, 47-63 Hz) | 30 watts external AC power adapter, (90-250 VAC, 47-63 Hz) | 150 watts external AC power adapter, (90-250 VAC, 47-63 Hz) |
| Vehicle mount | Charges 3.6 - 7.2V batteries from 12VDC vehicular power source | |||
| Approvals | CSA 60950, UL60950, EN 60950 for safety and FCC Part 15 Class A, EN55022 Class A for EMI, and EN61000-3-2, EN61000-3-3 and EN61000-4-2, -3, -4, -5, -6, -11 for EMC. RoHS and WEE compliant | |||
| Environmental | Operating temperature: 0°C to +40°C (32°F to +104°F) Storage temperature: -30°C to +70C (-22 to +158°F) | |||
Physical Length Width Height Weight | 232.4 mm (9.15”) 127 mm (5”) 57 mm (2.24”) 0.4 kg (0.88 lb) | 520.7 mm (20.5”) 232.2 mm (9.14”) 57 mm(2.24”) 3.25 kg (7.16 lb) | 232.4 mm (9.15”) 127 mm (5”) 57 mm (2.24”) 0.4 kg (0.88 lb) | 520.7 mm (20.5”) 232.2 mm (9.14”) 57 mm(2.24”) 3.25 kg (7.16 lb) |
| Warranty | Cadex warrants the analyzer against defective materials and workmanship for a period of one (1) year from the original purchase date. | |||
Phụ kiện
Vui lòng đăng nhập để viết đánh giá!
0906.988.447
Tư vấn zalo