Mỏ hàn chạy pin Solomon SL-089

Giới thiệu Mỏ hàn chạy pin Solomon SL-089

Mỏ hàn Solomon SL-089 chạy bằng pin AA x3., dễ dàng cho việc di chuyển sửa chữa xa nguồn điện

Thông tin sản phẩm

Battery Operated Soldering Iron

• This portable soldering iron is operated by means of 3x1.5V size AA batteries.

Safety Notes

• Place the protective cover over the tip when storing such that the cover secures the slide switch in the "OFF" position.
• Tip is hot, Do not touch, Do not immerse in water
• After using the soldering iron, cool the iron naturally before storing away.
• Always switch off the soldering iron after use by sliding the switch to the "OFF" position

Safety Notes

• Slide the battery cover open at the end of the soldering iron.
• Place 3x1.5V size AA alkaline batteries into the iron as illustrated and replace cover.
• Remove the protective cover at the tip
• Make sure tip is securely installed
• Slide the On/Off switch to the "ON" position
• Hold the soldering iron like a pen
• Press the round button on top of the On/Off switch continuously for approx. 15 seconds
• The tip should reach working temperature
• To save power, only press button when actually soldering
• The hot soldering iron should be placed standing upright with the tip pointing up when not in use to avoid contacting the surrounding
• After soldering , slide the switch to the "OFF" position, replace the protective cover

Maintainance

• If it takes more than 30 seconds to reach working temperature, replace the batteries
• Use alkaline batteries for best results. Do not mix old and new batteries.
• With 3 new batteries, this soldering iron can operate continuously for approx. 60 minutes.
• Do not change the soldering tip when hot, Use the tip exchanger provided to remove the tip as shown
• the soldering tip is iron-plated long life tip an therefore do not file the tip.
• If the soldering iron is not to be used for a long period of time, remove the batteries from the soldering iron.