Máy hiện sóng, Oscilloscope LeCroy HDO6104 1 GHz, 4 CH

Name: Máy hiện sóng, Oscilloscope LeCroy HDO6104 1 GHz, 4 CH
Brand: LeCroy
SKU: HDO6104
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

Mã:

HDO6104

0 đánh giá

Thương hiệu:

LeCroy

Bảo hành:

12 tháng

Giá: Liên hệ

Vui lòng liên hệ để kiểm tra tình trạng kho

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Băng thông: 1 GHz

Số kênh: 4 kênh analog

Tốc độ lấy mẫu: 10 GS/s

Độ dài bản ghi sóng: 50 Mpts / 250 Mpts

Độ nhạy: 1 MΩ: 1 mV / div – 10 V / div, biến đầy đủ;

50 Ω: 1 mV / div – 1 V / div, biến đầy đủ

Suy hao: ±(0.5%) F.S, offset at 0 V

Độ phân giải dọc:Độ phân giải ADC 12 bit, lên đến 15 bit với độ phân giải nâng cao

Input/Output: DC, AC, GND

Kiểu Trigger: Normal, Auto, Single

Nguồn Trigger: AC, DC, LFRJ, HFRJ, Noise RJ (CH1 ~ CH4)

Kiểu Trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time Out (Dropout), Pattern and Video.

Chức năng toán học:Độ lớn quang phổ. Đặt Thang đo dọc FFT thành RMS tuyến tính hoặc dBV RMS và Cửa sổ FFT thành Hình chữ nhật, Hamming, Hanning hoặc Blackman-Harris.

Xử lý và phân tích dữ liệu: Tìm kiếm, điều hướng, lịch sử, mask test, giản đồ Bode, phân tích năng lượng (tùy chọn) và đếm

Giao tiếp: USB Host, USB Device, LAN, GPIB

Hệ điều hành: Intel® i3-6100 Dual Core, 3.7 GHz (or better)

Hiển thị: Màn hình cảm ứng đa điểm TFT-LCD rộng 12,1 ”

Kích thước: 352 mm * 128 mm * 224 mm

Trọng lượng: N.W 3.4 Kg (2-ch); 3.6 Kg (4-ch)
G.W 4.9 Kg (2-ch); 5.2 Kg (4-ch)

Mô tả sản phẩm
Phụ kiện

Giới thiệu

Máy hiện sóng LeCroy DHO6104 băng thông 1 GHz, lấy mẫu 2.5 GSa/s, 4 kênh, bộ nhớ 50 Mpts/kênh, màn hình cảm ứng 12.1 inch.

Key Features

12-bit ADC resolution, up to 15 bits with enhanced resolution
350 MHz, 500 MHz and 1 GHz bandwidths
Long Memory – up to 250 Mpts/Ch
12.1” toucn screen display
Spectrum Analyzer Mode
WaveScan – Advanced Search and Find
History Mode – Waveform Playback
Power Analysis Software
JITKIT Clock-Data Jitter Analysis
Serial Data Trigger and Decode
PROTObus MAG Serial Data Debug Toolkit
LabNotebook Report Generation
Advanced Trigger Tools including TriggerScan and Software Assisted Trigger
16 Digital Channels with 1.25 GS/s Sample Rate
Mixed Signal Debug Capabilities
- Analog and Digital Cross Pattern Triggering
- Digital Pattern Search and Find
- Analog and Digital Timing Measurements
- Logic Gate Emulation

HD4096 High Definition Technology

HD4096 high definition technology enables oscilloscopes to capture and display signals of up to 1 GHz with high sample rate and 16 times more resolution than other oscilloscopes.

Benefits of HD4096 Technology

Waveforms captured and displayed on oscilloscopes with HD4096 technology are cleaner and crisper. Signal details often lost in the noise are clearly visible and easy to distinguish HD4096 enables oscilloscopes to deliver unmatched measurement precision for improved debug and analysis.

Comprehensive Analysis Tools

Comprehensive set of waveform math and measurement tools extends the debugging and analysis capability.

Complete Set of Applications

Complete set of solutions available for embedded, digital, power and automotive designs extends analysis

Spectrum Analyzer Interface

View signal details in the frequency domain with a spectrum analyzer style user interface

Identify and Isolate Problems Fast

Quickly locate analog or digital waveforms for runts, glitches or other anomolies with WaveScan

History Mode Waveform Playback

Scroll back in time to isolate anomalies and quickly find the source of the problem.

Touch Screen Simplicity

Easily control channels, trigger, math and measurements with the large multi-touch display and intuitive interface.

PROTObus MAG Serial Debug Toolkit

PROTObus MAG Toolkit extends serial data trigger and decode functions with integrated parameter measurements

Simple Power Measurements

Measure and analyze operating characteristics of power conversion devices and circuits

Sequence Mode

Capture many fast pulses separated by long delays in quick succession while maintaining fast sampling

Serial Bus Trigger and Decode

View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages

Save, Document, Report

Save all results and data with a single button press and create custom reports with LabNotebook

Cross Triggering

Flexible analog and digital cross-pattern triggering across all 20 channels

Digital Timing Measurements

Perform timing measurements on digital signals and analyze with trends, statistics and histicons

Parallel Pattern Search

Find a digital pattern across many digital lines using the parallel pattern search capability of WaveScan

Activity Indicators

Quickly see the state of all the digital lines at the same time using convenient activity indicators.

Logic Gate Emulation

Simulate complete digital designs using logic gate emulation.

Vertical System
Bandwidth	1 GHz
Analog Bandwidth (Max)	1 GHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input)	1 GHz (≥1 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input)	500 MHz (typical)
Rise Time (10-90%, 50 Ω)	450 ps (typical)
Input Channels	4
Bandwidth Limiters	20MHz, 200MHz
Input Impedance	1 MΩ ± 2.0% \|\| 15 pF, 50 Ω ± 2.0%
Input Coupling	1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage	50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
Channel-Channel Isolation	DC-400MHz > 1000:1; 400MHz up to rated BW > 300:1
Vertical Resolution	12 bits; up to 15 bits with enhanced resolution (ERES)
Sensitivity	50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable
DC Gain Accuracy	±(0.5%) F.S, offset at 0 V
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)	±(0.5%) F.S, offset at 0 V
Offset Range	50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 198 mV/div ±160 V @ 200 mV - 1 V/div ±400 V @ 1.02 V - 10 V/div
Offset Accuracy	+/-(1.0% of offset setting + 0.5%FS + 0.02% of max offset + 1mV)
DC Vertical Offset Accuracy	±(1.0% of offset setting + 0.5%FS + 0.02% of max offset + 1mV)

Horizontal System
Timebases	Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range	20 ps/div - 5 ks/div with standard memory (up to 10 ks/div with -L memory, 25 ks/div with -XL memory); RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy	+/-2.5ppm + 1.0ppm/year from calibration
Jitter Noise Floor	700fs
Trigger and Interpolator Jitter	≤ 4 ps RMS (typical) <0.1 ps RMS (typical, software assisted)
Channel-Channel Deskew Range	±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)	10MHz +/-25ppm at 0 to 10dBm into 50Ohms
External Timebase Reference (Output)	10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) via LBUS BNC adaptor
External Clock	DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies.

Acquisition System
Single-Shot Sample Rate/Ch	2.5 GS/s on 4 Ch
Random Interleaved Sampling (RIS)	125 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate	1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time	1 µs
Maximum Acquisition Memory	250 Mpts (4 Ch operation)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	50M / 50M / 50M (30,000)
Memory Options (4 Ch / 2 Ch / 1Ch) (Number of Segments)	L- Option: 100M / 100M / 100M (60,000) XL - Option: 250M / 250M / 250M (65,000)

Acquisition Processing
Averaging	Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)	From 12.5 to 15 bits vertical resolution
Envelope (Extrema)	Envelope, floor, or roof for up to 1 million sweeps
Interpolation	Linear or Sin x/x

Triggering System
Modes	Normal, Auto, Single, and Stop
Sources	Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode	DC, AC, HFRej, LFRej
Pre-trigger Delay	0-100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay	0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or Events	From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range	±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger ProBus Inputs	0.9 division: 10 MHz 1.0 divisions: 200 MHz 1.5 divisions: 500 MHz 2.0 divisions: 1 GHz
External Trigger Sensitivity, (Edge Trigger)	0.9 division: 10 MHz 1.0 divisions: 200 MHz 1.5 divisions: 500 MHz 2.0 divisions: 1 GHz
Max. Trigger Frequency, SMART Trigger	1GHz
External Trigger Input Range	Ext (±0.4 V); Ext/10 (±4 V)

Basic Triggers
Edge	Triggers when signal meets slope (positive, negative, or either) and level condition.
Window	Triggers when signal exits a window defined by adjustable thresholds
TV-Composite Video	Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).

SMART Triggers
State or Edge Qualified	Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First	In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout	Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern	Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don?t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.

SMART Triggers with Exclusion Technology
Glitch	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Width (Signal or Pattern)	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Interval (Signal or Pattern)	Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)	Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt	Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate	Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering	Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met

Cascade (Sequence) Triggering
Capability	Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event.
Types	Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic)
Holdoff	Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage.

Low Speed Serial Protocol Triggering (Optional)
Optionally available	I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0, AudioBus

Measurement Trigger
Measurement Trigger Capability	Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger.

Color Waveform Display
Type	Color 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen
Resolution	WXGA; 1280 x 800 pixels.
Number of traces	Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles	Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation	Sample dots joined, or sample dots only

Internal Waveform Memory
Internal Waveform Memory	4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.

Integrated Second Display
Type	Supports touch screen integration of user-supplied second display with split-grid capability.
Resolution	(Note: touch screen driver for second display may not be a Fujitsu driver)

Analog Persistence Display
Analog and Color-Graded Persistence	Variable saturation levels; stores each trace?s persistence data in memory
Persistence Types	Select analog, color, or three-dimensional
Trace Selection	Activate persistence on all or any combination of traces
Persistence Aging	Select from 500 ms to infinity
Sweep Display Modes	All accumulated, or all accumulated with last trace highlighted

Processor/CPU
Type	Intel Core i5, 2.5 GHz (or better)
Processor Memory	8 GB standard
Operating System	Microsoft Windows® 7 Pro 64 bit Embedded
Real Time Clock	Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.

Zoom Expansion Traces
Zoom Expansion Traces	Display up to 8 Zoom and 8 Math/Zoom traces

Setup Storage
Front Panel and Instrument Status	Store to the internal hard drive, over the network, or to a USB-connected peripheral device.

Interface
Remote Control	Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port	Supports IEEE - 488.2 (External)
Ethernet Port	Supports 2 10/100/1000BaseT Ethernet interface (RJ45 ports)
USB Ports	Minimum 6 total (incl. 2 front panel) USB 2.0 ports support Windows compatible devices
USB Device Port	1 USBTMC port
External Monitor Port	15 pin D-Type WXGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with WXGA resolution on second monitor.

Auxiliary Input
Signal Types	Select External Trigger or External Clock Input on the front panel
Coupling	50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage	50 Ω: 5 Vrms; 1 MΩ: 400 Vmax (DC + Peak AC ≤ 5 kHz)

Auxiliary Output
Signal Types	Select from control signals or Off
Output Signal	500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ
Control Signals	Trigger enabled, trigger out, pass/fail status, off
Connector Type	BNC, located on rear panel

Automatic Setup
Auto Setup	Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale	Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range

Probes
Probes	Qty. (4) ÷10 Passive Probes
Probe System	Probus. Automatically detects and supports a variety of compatible probes
Scale Factors	Automatically or manually selected depending on probe used
Calibration Output	Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 250 Hz to 1 MHz square wave; 50 mV to 1.0V.

Power Requirements
Voltage	100-240 VAC ±10% at 45-66 Hz; 110-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category 300 V CAT II
Max. Power Consumption	350 VA

Environmental and Safety
Temperature (Operating)	+5 °C to +40 °C
Temperature (Non-Operating)	-20 °C to +60 °C
Humidity (Operating)	5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating)	5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)	Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating)	Up to 40,000 ft. (12,192 m)
Random Vibration (Operating)	0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Random Vibration (Non-Operating)	2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Functional Shock	30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total

Physical Dimensions
Dimensions (HWD)	11.48"H x 15.72"W x 5.17"D (291.7 mm x 399.4 mm x 131.31 mm)
Weight	12.9 lbs. (5.86 kg.)
Shipping Weight	20.2 lbs. (9.2 kg)