Máy hiện sóng, Oscilloscope GW Instek GDS-1102-U, 100MHz, 2 CH
Máy hiện sóng, Oscilloscope GW Instek GDS-1102-U, 100MHz, 2 CH
- Vui lòng liên hệ để kiểm tra tình trạng kho
- Tạm thời chưa có khuyến mãi cho sản phẩm này
Hotline: 0906.988.447
Liên hệ: Hồ Chí Minh
- Điện thoại: (028).3977.8269
- Email: sales@lidinco.com
- Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM
Liên hệ: Bắc Ninh, Hà Nội
- Điện thoại: (0222).730.0180
- Email: bn@lidinco.com
- Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
- Tư vấn kĩ thuật Miễn phí
- Miễn phí vận chuyển Đơn hàng trên 3 triệu
Dữ liệu đang được cập nhật
Oscilloscope GW Instek GDS-1102-U băng thông 100 MHz, lấy mẫu 250 MSa/s, 2 kênh, bộ nhớ 4 kpts/kênh, màn hình 5.7 inch.
- 4k Memory Length per Channel
- Peak Detect as Fast as 10ns
- Save/Recall of 15 Front Panel Settings & Waveforms
- 5.7" TFT colour Display
- 19 Auto Measurements
- Arithmetic Operators - Add, Subtract, FFT
- USB Port for PC Connection
- Data Logger
VERTICAL | ||
Channels | 2 | |
Bandwidth | DC ~ 100MHz (-3dB) | |
Rise Time | <3.5ns Approx. | |
Sensitivity | 2mV/div ~ 10V/div (1-2-5 increments) | |
Accuracy | ±(3% x |Readout|+0.1 div + 1mV) | |
Input Coupling | AC, DC & Ground | |
Input Impedance | 1M±2%, ~15pF | |
Polarity | Normal & Invert | |
Maximum Input | 300V (DC+AC peak), CATII | |
Waveform Signal Process | + , - , FFT | |
Offset Range | 2mV/div ~ 50mV/div : ±0.4V , 10mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V , 10V/div:±300V | |
Bandwidth Limit | 20MHz (-3dB) | |
TRIGGER | ||
Sources | CH1 , CH2 , Line , EXT | |
Modes | Auto, Normal, Single, TV, Edge, Pulse Width | |
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | |
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~50/70/ 100MHz: Approx. 1.5div or 15mV | |
EXT TRIGGER | ||
Range | ±15V | |
Sensitivity | DC ~ 25MHz : ~ 50mV ; 25M ~ 50/70/100MHz : ~15mV | |
Input Impedance | 1MΩ±2% , ~ 16pF | |
Maximum Input | 300V (DC AC peak) , CATII | |
HORIZONTAL | ||
Range | 1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 50ms/div ~ 50s/div | |
Modes | Main, Window, Window Zoom, Roll, X-Y | |
Accuracy | ±0.01% | |
Pre-Trigger | 10 div maximum | |
Post-Trigger | 1000 div | |
X-Y MODE | ||
X-Axis Input | Channel 1 | |
Y-Axis Input | Channel 2 | |
Phase Shift | ±3° at 100kHz | |
SIGNAL ACQUISITION | ||
Real-Time Sample Rate | 250MSa/s maximum | |
Equivalent Sample Rate | 25GSa/s maximum | |
Vertical Resolution | 8 Bits | |
Record Length | 4K Dots maximum | |
Acquisition Mode | Normal, Peak Detect, Average | |
Peak Detection | 10ns (500ns/div ~ 10s/div) | |
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | |
CURSORS AND MEASUREMENT | ||
Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot | |
Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle | |
Cursors Measurement | Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) | |
Auto Counter | Resolution : 6 digits Accuracy : ±2% Signal Source: All available trigger source except the Video trigger mode | |
CONTROL PANEL FUNCTION | ||
Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level | |
Save Setup | Up to 15 sets of measurement conditions | |
Save Waveform | 15 sets of waveform | |
DISPLAY | ||
TFT LCD Type | 5.7 inch | |
Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots | |
Display Graticule | 8 x 10 divisions | |
Display Brightness | Adjustable | |
INTERFACE | ||
USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) | |
USB Host | Image (BMP), waveform data (CSV), and setup (SET) | |
POWER SOURCE | ||
Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | |
MISCELLANEOUS | ||
Multi-Language Menu | Available | |
Online Help | Available | |
Go/NoGo Function | Available | |
Data Logger | Available | |
DIMENSIONS & WEIGHT | ||
310(W) x 142(H) x 140(D)mm; Approx. 2.5kg |
User manual x 1, Power Cord x 1 Probe-GTP-070A-4 : 70MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1052-U (one per channel) Probe-GTP-070A-2 : 70MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1072-U (one per channel) Probe-GTP-100A-2 : 100MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1102-U (one per channel) Optional Accessories GSC-006 Soft carrying case GTL-110 Test lead, BNC-BNC heads GTL-242 USB 2.0 A-B type cable
Phụ kiện
Vui lòng đăng nhập để viết đánh giá!