Máy hiện sóng cầm tay Micsig tBook TO102, 100MHz, 2 CH
Máy hiện sóng cầm tay Micsig tBook TO102, 100MHz, 2 CH
Mã:
N/A
Thương hiệu:
Bảo hành:
N/A
Giá: Liên hệ
- Vui lòng liên hệ để kiểm tra tình trạng kho
- Tạm thời chưa có khuyến mãi cho sản phẩm này
Hotline: 0906.988.447
Liên hệ: Hồ Chí Minh
- Điện thoại: (028).3977.8269
- Email: sales@lidinco.com
- Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM
Liên hệ: Bắc Ninh, Hà Nội
- Điện thoại: (0222).730.0180
- Email: bn@lidinco.com
- Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
- Tư vấn kĩ thuật Miễn phí
- Miễn phí vận chuyển Đơn hàng trên 3 triệu
Thông số kỹ thuật
Dữ liệu đang được cập nhật
Máy hiện sóng, oscilloscope dạng cầm tay hãng Micsig tBook TO102 băng thông 100 MHz, lấy mẫu 1 GSa/s, 2 kênh, bộ nhớ 18 Mpts/kênh, màn hình cảm ứng 10.1 inch, kết nối USB với PC
The tBook TO102 model is 10.0 inches touch screen digital tablet oscilloscope including 2 channels with 1GS/s sampling rate (1 CH), and 100 MHz of bandwidth. The tBook TO102 model is supplied with an USB cable to connect scope with PC, a Probe, and a power adapter as a standard accessories.
Features
- 2 Channels
- Bandwidth: 100 MHz
- Screen resolution: 1024x600
- Display screen: 10.1 inches TFT LCD Multi point touchable capacitive screen
- Waveform capture rate: 50,000 wfms/s - Optional: 250,000 wfms/s
- Interface: USB2.0, Micro USB2.0, DC
- Operating temperature: -10°C to 40°C
- Dimensions: 210mm(H) x 275mm(W) x 60mm(D)
- Weight: 1706g
Item |
Descrption |
Bandwidth(BW) | 100MHz,150MHz,200MHz,300MHz,350MHz,500MHz |
Real time sampling rate | 1GSa/s~5GSa/s |
Memory depth | single channel:18Mpts~360Mpts |
Max waveform capture rate | 250,000wfms/s(Optional) 500,000wfms/s(Optional) |
Channels | 2 or 4 |
Rise time | ≤5ns~≤350ps |
Vertical system |
|
Limited bandwidth | 200MHz,20MHz |
Input coupling | DC ,AC ,GND |
Input impedance | 1MΩ±1%≈15pF±3 pF |
Vertical scale | 2mV/div~5V/div |
Vertical resolution | 8 bit |
Probe loading | 1mX~1kX,1~2~5 step by step |
Maximum input voltage | 300V CAT Ⅲ |
Isolated channel voltage | 1000V CAT Ⅱ 600V CAT Ⅲ |
DC vertical offset accuracy | 2mV/div~10V/div,±2.0% |
Trigger system |
|
Trigger types | edge,pulse,short pulse,logic,serial data (UART,LIN,CAN,SPI,I2C,1553B, 429) |
Video trigger software options | PAL,NTSC,SECAM,720P,1080I,1080P |
Coupling modes | DC,AC,HF Rej,LF Rej,Noise Rej |
Trigger modes | auto,normal,single |
Trigger source | CH1,CH2,CH3,CH4 |
Inhibition range | 200ns~10s |
Display |
|
Screen | 10.1 inchesTFT LCD capacitive touch screen |
resolution | 1024*600 |
Backlight | 500(250) |
Diagram | 18*10 |
Grayscale | 128 |
Persistence | auto,100ms~10s or ∞ |
Language | Simplified Chinese,English |
I/O port |
|
Mini USB2.0 | connect to PC |
USB2.0 | flash disk,mouse,button,wireless mouse |
WiFi | support 802.11b/g/n,up to 150Mbps |
Record |
|
Display ways | full screen,roll |
Record time base | 10us/div~2min/div |
File size | ≤4G |
Dimension |
|
Size | 275*210*60mm |
Weight | main unit: 1770g,accessories: 420g,battery:276g |
Automatic measurements | 31 measurements include:Period, Frequency,Delay,Rise Time,Fall Time,Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width,Negative Pulse Width,Burst Width,Phase, Positive Overshoot,Negative Overshoot, Peak to Peak,Amplitude,High,Low,Max,Min,Mean,Cycle Mean,RMS,Cycle,RMS |
Cusors | vertical cursor,horizontal cursor,cross cursor |
Horizontal system |
|
Time base range | 200ps/div~1000s/div |
Time base delay time range | - 12div~12ks |
Time base accuracy | normal, average, peak , envelop |
Display mode | 20ppm |
Formart | XY, YT, Roll |
Acquisition Modes | 2 simultaneous |
Math functions |
|
Operator | +, -, *, / |
FFT | Rectangular,Hamming,Hanning, Blackman-Harris |
Storage |
|
Storage | tablet oscilloscope,USB device, PC |
Storage format | CSV、waveform、jpg |
Refernce waveform | ≤4 |
Waveform setting | 4 sets |
Dynamic record time | ≤2H |
Power |
|
Power adapter | Input:100-240V,50-60Hz,2A;Output:12VDC,5A |
Battery | 7.4V/9000mAh,life length 4~8h |
Charging time | <5h |
Power consumption | ≤15W |
Environment |
|
Operating temperature | -20℃~+50℃ |
Operating humidity | <95%RH |
Operating altitude | <3000m |
Storage altitude | <12000m |
Probe |
|
Operating voltage | CAT III 300V,CAT II 600V |
Attenuation ratio | 10X |
Input capacitance | 13pF |
Matched oscilloscope scale | 10pF~30pF |
Input impedance | 10MΩ±1% |
Frequency scale | DC~250MHz |
Rise time | 1ns |
Cable length | 1200mm |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Four isolated inputs (optional) , and all isolated inputs allow independent floating measurements with each input. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3- D waveform display |
HD trigger |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3- D display function redefines the waveform display, oscilloscope counts every data in order to display them with different colors or brightness, so that 2- D display (time and amplitude) turn into 3- D display (plus dimension of signal frequency), which becomes clear to distinguish the occasional signals ,and provides an excellent visual effect .Support HD trigger for PAL,NTSC,SECAM,720P,1080I ,1080P (optional). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Up to 500K wfms/s waveform capture rateWaveform capture rate offers how many waveforms display in a minute, "Dead zone" of oscilloscope is the time of processing and displaying the waveform which have been captured, during the time oscilloscope sacrifices any waveforms. The time of "Dead zone" is far more than "Display zone" for common oscilloscope, which results to signals can not be displayed in most time, so abnormal signals escaped. High capture rate oscilloscope reduces the "Dead zone" time, and abnormal signals can be caught fast and accurately |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eye pattern modeA perfect eye pattern contains an immense amount of parametric information about a signal, it gives you a visual indication of overall signal quality, noise level and signal jitter without looking at the data content. It finds errors like improper cable connections, bad contacts, incorrect grounding and missing or superfluous terminators. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Series bus trigger and decodeWaveform and data can be got in graphic mode : while in text mode , address , ID,data ,examination which makes up the frame are classified , also frame type and mistake can be classified, which helps user to debug and analyze the serial bus easier, and waveform data can be transfered to a PC by a flash device. |
Phụ kiện
Đánh giá & nhận xét
Vui lòng đăng nhập để viết đánh giá!