Máy phát xung pulse PSPL2600C Tektronix

Name: Máy phát xung pulse PSPL2600C Tektronix
Brand: Tektronix
SKU: PSPL2600C
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

Mã:

PSPL2600C

0 đánh giá

Thương hiệu:

Tektronix

Bảo hành:

N/A

Giá: Liên hệ

Vui lòng liên hệ để kiểm tra tình trạng kho

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Dữ liệu đang được cập nhật

Mô tả sản phẩm
Phụ kiện

Các thông số chính:

Positive or negative polarity pulses
Adjustable pulse amplitude from < 16 mV to 50 V
Rise Time ≤ 300 ps
Adjustable duration from < 1 ns to 100 ns
Single shot, or 1 Hz to 100 kHz repetition rate

Chức năng chính

Front panel operation
Internal, external or manual trigger modes
Continuously variable repetition rate and duration settings

Ứng dụng

University education and research
UWB signal source
Semiconductor characterization
Laser driver

Hiệu suất

Positive pulse

Negative pulse

The following figures show typical positive and negative waveforms with the pattern generator Duration control set to minimum. The displays are set to 10 V/div and 1 ns/div.

Minimum duration positive pulse

Minimum duration negative pulse

The following figures show typical leading edge and trailing edge waveforms. The displays are set to 10 V/div and 200 ps/div.

Leading edge waveform

Trailing edge waveform

The following figures show typical pulses with various pulse waveform durations. The displays are set to 10 V/div and 20 ns/div.

20 ns duration pulse waveform

50 ns duration pulse waveform

100 ns duration pulse waveform

The following figures show typical histogram measurements of the timing jitter. The displays are set to 10 V/div and 50 ps/div.

Adjustable delay trigger, trigger measures 12.8 ps_rms

Fixed 115 ns delay trigger, jitter measures 6.8 ps_rms

The following figure shows an adjustable duration waveform from 1 ns to 100 ns. The display is set to 10 V/div and 500 ps/div.

Adjustable duration waveform

Các thông số được nêu dưới đây là các giá trị tiêu biểu. Được đảm bảo ở nhiệt độ 23 °C (±3 °C)

Parameter	PSPL2600C	PSPL2600C TURBO
Amplitude range into 50 Ω ¹	14 mV to 45 V, ≥40 V min.	16 mV to 50 V, ≥45 V min.
Transition time, leading edge (10 – 90%) ¹	400 ps, ≤500 ps max.	250 ps, ≤350 ps max.
Transition time, trailing edge (10 – 90%) ¹	1 ns, ≤1.8 ns max.	800 ps, ≤1 ns max.
Topline overshoot	≤2%	<4%
Attenuation	0 to 70 dB, 1 dB steps
Polarity	Positive or negative
Baseline	0 V
Reflection coefficient	-30% during pulse, +50% after pulse. Improves with increasing attenuation.
Source impedance (nominal)	50 Ω
Duration (FWHM)	< 1 ns to 100 ns, continuously adjustable
Baseline precursor	< ±2%
Topline perturbations	< ±2%
Spurious pulse at 115 ns	+6% with duration ≤ 20 ns, +30% for pulse duration = 100 ns

¹ Parameters listed are for positive polarity pulse. Negative polarity pulse amplitude is typically 1 dB less and the rise times and fall times are typically 75 ps slower.

Trigger and timing

The performance parameters listed in this table are typical values; parameters are guaranteed only when maximum and/or minimum limits are given.

Parameter	Value
Adjustable delay	0 to 100 ns
Adjustable delay jitter, RMS	≤35 ps
Fixed trigger delay	115 ns
Fixed trigger delay jitter, RMS	≤12 ps
Repetition rate	1 Hz to 100 kHz continuously adjustable
External trigger input level	TTL pulse required, level > 1.5 V, + slope, > 10 ns duration
External trigger impedance	430 Ω
Trigger output into 50 Ω	0.8 V
Trigger in/out delay	200 ns

General specifications

Parameter	Description
Accessories included	Power cord, front handles, rack mount kit, instruction manual
Front panel controls	Power, repetition rate range, rep. rate vernier, delay, duration, polarity, and attenuation
Power supply (mains)	100, 115, or 230 VAC, ±10% switch selectable, 50 or 60 Hz
Power consumption	42 VA (60 Hz), 65 VA (50 Hz)
Operating environment
Temperature	40 °C (104 °F); low limit of 0 °C (32 °F)
Humidity	80% for temperatures up to 31 °C (88 °F), decreasing linearly to 50% at 40 °C (104 °F)
Elevation	2000 m (6562 ft.)
Dimensions	17 x 13 x 3.25 in. (43.2 x 33.0 x 8.3 cm)
Weight	15 lbs (6.8 kg)
Connectors	SMA output, BNC for trigger in and trigger output
Warranty	One year