Máy hiện sóng, Oscilloscope LeCroy SDA 725Zi-A 2.5 GHz, 4 CH

Máy hiện sóng, Oscilloscope LeCroy SDA 725Zi-A 2.5 GHz, 4 CH

Mã:
SDA 725Zi-A
Thương hiệu:
Bảo hành:
N/A
Giá: Liên hệ
  • Vui lòng liên hệ để kiểm tra tình trạng kho
  • Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447 

Liên hệ: Hồ Chí Minh

  • Điện thoại: (028).3977.8269
  • Email: sales@lidinco.com
  • Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

  • Điện thoại: (0222).730.0180
  • Email: bn@lidinco.com
  • Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
  • Tư vấn Tư vấn kĩ thuật Miễn phí
  • Giao hàng Miễn phí vận chuyển Đơn hàng trên 3 triệu
Thông số kỹ thuật

Dữ liệu đang được cập nhật

Giới thiệu

Máy hiện sóng  LeCroy SDA725Zi-A băng thông 2.5 GHz, lấy mẫu 20 GSa/s, 4 kênh, bộ nhớ 32 Mpts/kênh, màn hình 15.4 inch.

SDA725Zi-A
Freedom from Limitations

SDA 7 Zi-A excels in the way it offers general purpose utility never before seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi-A oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4 and 6 GHz models include both ProBus and ProLink input types which means eight probes can be attached and then multiplexed from the front panel or by remote control. The result— it's easy to hook up a passive probe even on 4 or 6 GHz models—no more frustration and hassle of trying to find a 1 MΩ input adapter. Plus, any existing investment in Teledyne LeCroy probes, such as current probes, single-ended or differential active probes, or high voltage probes, is fully leveraged. Perfect.

Additional Capability Standard

SDA 7 Zi-A models provide additional serial data analysis capabilities, including SDAIII for eye diagram and Tj /Rj / Dj / DDj jitter analysis and decomposition. These items cost extra in WavePro 7 Zi-A models. Additional capabilities include:

  • 32 Mpts/ch memory
  • SDAIII software (further upgradeable to include multi-lane serial data analysis)
  • JTA2 software
  • SDM and ET-PMT software
  • 8b10b decode
More Triggers Isolate More Problems More Effectively

A powerful combination of high bandwidth Edge and 10 different SMART triggers allow you to isolate the problem quickly and begin to focus on the cause. Most SMART triggers allow triggering on pulse widths or features as small as 200 ps. A high-speed serial trigger enables triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length. Built-in hardware clock recovery is also included.

TriggerScan

TriggerScan uses high-speed hardware triggering capability with persistence displays to capture only the signals of interest and provide answers up to 100X faster that other methods. Traditional fast display update modes work best on frequent events occurring on slow edge rates while TriggerScan excels in finding infrequent events on fast edge rates.

WaveScan Advanced Search and Analysis Finds Problems that Triggers Won't Find

The best trigger won't find all unusual events—a more powerful capability is sometimes needed. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search) or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition and begin scanning. When an event is found, WaveScan highlights the error on screen and displays a table listing the errors.

Fully Integrated Mixed Signal Oscilloscope (4+36) Option

Add Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed signal options. These convenient add-ons connect to the Teledyne LeCroy LBUS and quickly and simply provide capability to acquire up to 36 digital lines time-correlated with analog waveforms. No time is wasted in trying to learn how to connect, synchronize or operate a complicated logic analyzer since the MSOs are already completely integrated into the scope operation. In addition to acquiring digital lines, they are also helpful for monitoring low-speed signals, such as serial data clock, data, and chip select signals, thus preserving the analog channels for higher speed requirements.

Teledyne LeCroy - The Acquisition Memory Leader

Teledyne LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi Series' proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at 256 Mpts deep. What you experience is performance gains of 10–20X over what is available today. Whether looking at the acquired signal or while analyzing several screens of statistics, tracking a frequency or identifying complex patterns the WavePro 7 Zi is designed to perform.

Instantaneous Responsiveness

The first time you use the Zi oscilloscope you will experience responsiveness that you've never seen before. Acquiring and manipulating the longest record lengths and the most complex WaveShape Analysis are all easily handled at the same time. Whether you use the front panel or choose to make adjustments with a mouse or the touch screen, the system performs.

X-Stream II Architecture - Optimized for Fast Throughput

Designed for long memory operation and responsiveness X-Stream II technology enables high throughput of data—even when the oscilloscope is performing multiple 100 Mpts waveforms. It does so by eliminating the trade-offs between long memory length and quick processing. WavePro 7 Zi's proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor, high-speed serial data buses, a 64-bit OS and up to 8 GB of RAM.

Optimized for Long Memory

By using variable waveform segment lengths to improve the CPU cache memory efficiency the WavePro 7 Zi is designed for the fastest processing of long waveform records. The result—10-20 times faster processing compared to other oscilloscopes.

Optimized for Responsiveness

By dynamically allocating buffers where to maximize memory availability the WavePro 7 Zi Series embodies the fastest front panel responsiveness. Waveform previewing shows interim calculation results while a built in processing abort make front panel control changes instant by stopping the current process and allowing new waveforms to be positioned or zoomed—all without a lengthy recalculation.

Digital Filter Software Package (WPZi-DFP2)

DFP2 lets you implement Finite or Infinite Impulse Response filters to eliminate undesired spectral components, such as noise, and enhances your ability to examine important signal components. You can choose from a standared set of FIR or IIR filters. You can also design your own filters.

Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)

The spectrum converts the controls of your oscilloscope to those of a spectrum analyzer. Adjust the frequency span, resolution and center frequency. Apply filtering to your signal and watch the frequency signature change in real time. A unique peak search labels the spectral components and presents frequency and level in a table. Touch any line jump to that peak.

Mixed Signal Oscilloscope Option (MS-250/MS-500)

The Mixed Signal option allows the WavePro 7 Zi to convert to a mixed signal oscilloscope with up to 36 digital channels. Channels are sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs time-synchronized with four analog channels extends the oscilloscope's use to provide a total system view.

Jitter and Timing Analysis Package

Specialized timing parameters measure period, cycle-cycle, half period, width, etc. jitter on a variety of signals. Use the three views of jitter (statistical, time, and frequency) to understand root cause and to debug problems. Histograms provide understanding of statistical distributions. Tracks provide a means to show time-correlated peaks of jitter, and compare to other signals. FFTs provide the ability to debug root causes of high in-circuit jitter.

Vertical System

Analog Bandwidth (Max)2.5 GHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input)2.5 GHz (≥10 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input)500 MHz (typical) (≥5 mV/div)
Rise Time (10-90%, 50 Ω)150 ps (typical, flatness mode)
Rise Time (20-80%, 50 Ω)113 ps (typical, flatness mode)
Input Channels4
Bandwidth Limiters20 MHz, 200 MHz, 1 GHz
Input Impedance50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input CouplingProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage50 Ω: ±5 Vrms 1 MΩ: 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel IsolationDC to 2 GHz: 46 dB (>200:1) 2 to 4 GHz: 34 dB (>50:1) 4 to 6 GHz: 26 dB (>20:1) (For any two ProLink input channels, same v/div settings, typical)
Vertical Resolution8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity50 Ω: 2 mV-1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV-10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)±1% F.S. (typical), offset at 0V; ±1.5% F.S. (test limit), offset at 0V
Vertical Noise Floor (50 mV/div)1.2 mVrms (typical)
Offset Range50 Ω (ProBus) ±750 mV @ 10 mV - 170 mV/div ±4 V @ 172 mV - 1 V/div1 MΩ ±1 V @ 2 mV - 128 mV/div ±10 V @ 130 mV - 1.28 V/div ±100 V @ 1.3 V - 10 V/div
DC Vertical Offset Accuracy±(1.5% of offset setting + 1.5% F.S. + 1 mV) (typical) ±(1.5% of offset setting + 2.5% F.S. + 2 mV) (test limit)
 

Horizontal System

TimebasesInternal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range20 ps/div-3200 s/div (Real-Time Mode: 20 ps/div - 2000 s/div; RIS mode: 20 ps/div - 10 ns/div, user selectable at ≤10ns/div; Roll mode: 100 ms/div up to 3200 s/div, user selectable at ≥100 ms/div and ≤5 MS/s), depending on memory length
Clock Accuracy< 1 ppm + (aging of 0.5ppm/yr from last calibration)
Sample Clock Jitterup to 10µs Acquired Time Range: 100fsrms (Internal Timebase Reference)up to 3.2ms Acquired Time Range: 150fsrms (Internal Timebase Reference)
Delta Time Measurement Accuracy√2*√((Noise/SlewRate)^2+(Sample Clock Jitter)^2 ) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor√((Noise/SlewRate)^2+(Sample Clock Jitter)^2 ) secondsrms (TIE)
Jitter Noise Floor1.0 ps (TIE, typical)
Jitter Between Channels<700fsrms (TIE, typical, measured at maximum bandwidth)
Trigger and Interpolator Jitter≤ 2 ps RMS (typical) <0.1 ps RMS (typical, software assisted)
Channel-Channel Deskew Range±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output)10 MHz; 50 Ω impedance, output at the rear
External Clock30 MHz-2 GHz, 50 Ω impedance, applied at the auxiliary input
 

Acquisition System

Single-Shot Sample Rate/Ch40 GS/s on 2 Ch 20 GS/s on 4 Ch
Random Interleaved Sampling (RIS)200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time1 µs
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)32M / 64M / 64M (15,000)
Memory Options (4 Ch / 2 Ch / 1Ch) (Number of Segments)M-64 Option: 64M / 128M / 128M (15,000) L-128 Option: 128M / 256M / 256M (15,000)
 

Acquisition Processing

AveragingSummed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)From 8.5 to 11 bits vertical resolution
Envelope (Extrema)Envelope, floor, or roof for up to 1 million sweeps
InterpolationLinear or Sin x/x
 

Triggering System

ModesNormal, Auto, Single, and Stop
SourcesAny input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling ModeDC, AC, HFRej, LFRej
Pre-trigger Delay0-100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay0-10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or EventsFrom 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger ProBus Inputs2 div @ < 2.5 GHz 1.5 div @ < 1.25 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
External Trigger Sensitivity, (Edge Trigger)2 div @ < 1 GHz 1.5 div @ < 500 MHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling)
Max. Trigger Frequency, SMART Trigger2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 300 ps)
External Trigger Input RangeAux (±0.4 V); Aux/10 (±4 V)
 

Basic Triggers

EdgeTriggers when signal meets slope (positive, negative, or either) and level condition.
WindowTriggers when signal exits a window defined by adjustable thresholds
TV-Composite VideoTriggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
 

SMART Triggers

State or Edge QualifiedTriggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified FirstIn Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
DropoutTriggers if signal drops out for longer than selected time between 1 ns and 20 s.
PatternLogic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
 

SMART Triggers with Exclusion Technology

GlitchTriggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern)Triggers on positive, negative, or both widths with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern)Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
RuntTrigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew RateTrigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion TriggeringTrigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
 

Cascade (Sequence) Triggering

CapabilityArm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event.
TypesCascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic)
HoldoffHoldoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage.
 

High Speed Serial Protocol Triggering

Data Rates100 Mb/s - 1.25 Gb/s
Pattern Length80 bits, NRZ or 8b10b
Clock and Data Outputs400mVp-p (typical) AC coupled
Clock Recovery Jitter2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BWPLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
 

Low Speed Serial Protocol Triggering (Optional)

Optionally availableI2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, AudioBus
 

Measurement Trigger

Measurement Trigger CapabilitySelect from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger.
 

Color Waveform Display

TypeColor 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
ResolutionWXGA; 1280 x 768 pixels.
Number of tracesDisplay a maximum of 16 traces (up to 40 with some software options). Simultaneously display channel, zoom, memory and math traces.
Grid StylesAuto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform RepresentationSample dots joined, or sample dots only
 

Internal Waveform Memory

Internal Waveform Memory12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
 

Integrated Second Display

TypeSupports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver)
ResolutionDetermined by display chosen by user
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity256 Intensity Levels, 1-100% adjustable via front panel control
Number of Channelsup to 4 simultaneously
Max Sampling Rate40 GS/s
Waveforms/second (continuous)up to 2500 Waveforms/second
OperationFront panel toggle between WaveStream ON (Analog), ON (Color) and OFF
 

Analog Persistence Display

Analog and Color-Graded PersistenceVariable saturation levels; stores each trace's persistence data in memory
Persistence TypesSelect analog, color, or three-dimensional
Trace SelectionActivate persistence on all or any combination of traces
Persistence AgingSelect from 500 ms to infinity
Sweep Display ModesAll accumulated, or all accumulated with last trace highlighted
 

High Speed Digitizer Output (Option)

TypeLeCroy LSIB
Transfer Rateup to 325 Mpt/s (Maximum)
Output ProtocolPCI Express, Gen 1 (4 lanes utilized for data transfer)
Control ProtocolTCP/IP
Command SetVia Windows Automation, or via LeCroy Remote Command Set
 

Processor/CPU

TypeIntel® CoreTM i7-2600 Quad, 2.6 GHz (up to 3.8 GHz in Turbo mode) (or better)
Processor Memory8 GB standard for STD memory (32 Mpt) and M-64 memory options 16 GB standard for L-128 memory options Up to 32 GB optional
Operating SystemMicrosoft Windows® 7 Professional Edition (64-bit)
Real Time ClockDate and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Zoom Expansion Traces

Zoom Expansion TracesDisplay up to 12 Zoom and 12 Math/Zoom traces
 

Setup Storage

Front Panel and Instrument StatusStore to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote ControlVia Windows Automation, or via LeCroy Remote Command Set
Network Communication StandardVXI-11 or VICP, LXI Class C (v 1.2) Compliant
GPIB PortSupports IEEE - 488.2
LSIB Port (optional)Supports PCIe Gen1 x4 protocol with LeCroy supplied API
Ethernet PortSupports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Portsminimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port15 pin D-Type WXGA compatible to support customer-supplied external monitor. Includes support for extended desktop operation with second monitor.
Peripheral BusLeCroy LBUS standard
 

Auxiliary Input

Signal TypesFor External Trigger Input
Coupling50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
 

Auxiliary Output

Signal TypesSelect from calibrator, control signals or Off
Output Signal500 Hz-5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV-1 V into 1 MΩ)
Control SignalsTrigger enabled, trigger out, pass/fail status, off
Connector TypeBNC, located on front
 

Automatic Setup

Auto SetupAutomatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical ScaleAutomatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

General

Auto CalibrationEnsures specified DC and timing accuracy is maintained for 1 year minimum.
 

Probes

ProbesQty. (4) ÷10 Passive Probes
Probe SystemProbus (and ProLink on 4-6 GHz models). Automatically detects and supports a variety of compatible probes
Scale FactorsAutomatically or manually selected depending on probe used
Calibration OutputCal Output: 1kHz square wave, 1Vp-p (typical), output to probe hook. Fast Edge Output: 5MHz square wave, 450mVp-p (typical), 110ps rise time, output to SMA connector, AC Coupled.
 

Power Requirements

Voltage100-240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category 300 V CAT II
Max. Power Consumption800 W/800 VA
 

Environmental and Safety

Temperature (Operating)+5 °C to +40 °C including CD-RW/DVD-ROM drive
Temperature (Non-Operating)-20 °C to +60 °C
Humidity (Operating)5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating)5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating)Up to 40,000 ft. (12,192 m)
Random Vibration (Operating)0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Random Vibration (Non-Operating)2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Functional Shock20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
 

Physical Dimensions

Dimensions (HWD)14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight40.5 lbs. (18.5 kg)
Shipping Weight58.5 lbs. (26.5 kg)

Phụ kiện

Máy đo điện trở cách điện Keysight U1453A

Liên hệ

Máy đo điện trở cách điện Keysight U1461A

Liên hệ

Máy hàn cáp quang Ilsintech Swift K7, Core to Core

Liên hệ

Máy cắt mẫu đĩa kim cương Top Tech PRECISO-CH SERIES CH75

Liên hệ

Máy thử điện áp chịu đựng UCE UC8801 5kVAC/6kVDC

Liên hệ

Máy phát xung Lecroy T3AFG500

Liên hệ

Máy phát xung Lecroy T3AFG350

Liên hệ

Máy phát xung Lecroy T3AFG200

Liên hệ

Máy phát xung Lecroy T3AFG120

Liên hệ

Máy phát xung Lecroy T3AFG80

Liên hệ

Máy phát xung Lecroy T3AFG60

Liên hệ

Máy phát xung Lecroy T3AFG30

Liên hệ

Máy phát xung Lecroy T3AFG40

Liên hệ
Đánh giá & nhận xét

0.0/5

(0 đánh giá)
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0

Vui lòng đăng nhập để viết đánh giá!

Đánh giá của bạn về sản phẩm này: