3D Printer Mits M3DS-100

3D Printer M3DS-100

All the printers has cotater printing system with bottom-up print. Shore A25 rebounding resin has more kick back when bended compared to the other resins. Panel color is subject to change without notice. Specifications are subject to change without notice.

High definition printing

With fine layer thickness, inclined surface or curved surface can be printed very smoothly. Objects with stick out feature also can be printed.

High speed printing

As MITS 3D printer adopted surface exposure using projector. Unlike laser scanning or FDM, one layer is printed as one face at a time.
Therefore, no matter what the size of the objects, or number of objects to be created, printing speed is faster, and time to complete is easily calculated.

Small amount of resin required

While most stereolithographic type of 3D printers requires large amount of resin to be put into resin pool, FLASH75 and M3DS requires small amount of resin to be put into resin pool.
(FLASH75: 200cc / M3DS-100, 200: 350cc / M3DS-300: 800cc)

Long lifetime light source with less deterioration of brightness

MITS 3D printer is environment friendly and does not use light source with mercury. Light source lifetime is about 20,000 hours (10 times more than mercury lamp. So you can save time and cost for changing lamp.

Possible to mix resins

Resin can be colored by mixing dye or pigment.
Different resins can be mixed each other. As Acrylic resin and rubber like resin can be mixed together, objects with high ductility can be printed. By changing the mixture ratio, you can have ductility of your choice.