Vitrox V810i S2 XLW Advanced 3D X-ray Inspection System
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
- Technical Counseling 100% Free
- Free Shipping For 3.000.000vnd Order
Specification
Data is being updated
Largest Platform among all AXI Series which able to cater up to 52″ x 52″ board size.
System | V810i S2 Series |
System controller | Integrated controller with 8 Core Intel Xeon processors |
Operating system | Windows 10 (64 bits) |
Test Development Environment | |
User interface | Microsoft Windows based software solution with easy-to-use GUI and password-protected user levels |
Off-line test development software | Optional for off-line PC |
CAD conversion tool | Support 4 different types of CAD in V810i software and optional software available to translate other CAD data to ViTrox’s format |
Typical test development time | 4 hours to 1.5 days to convert raw CAD file and develop application |
Line Integration | |
Transport heights | 865 mm – 1025 mm |
Line communication standard | SMEMA, HERMES |
Barcode readers | Compatible with most industry standard barcode readers |
Performance Parameters * | |
Typical image acquisition rate | 51.68 cm2/sec (8 in2/sec) at 19um |
False Call rate | 500 – 1000 ppm |
Minimum features detection capability | |
Joint pitch1 | 0.3 mm and above |
Short width2 | 0.045 mm |
Solder thickness | 0.0127 mm |
Allowable Panel Characteristics ** | V810i S2 XLW |
Maximum PCB Size (L x W) | 1320.8mm x 1320.8mm (52″ x 52″) |
Minimum PCB Size (L x W) | 127mm x 127mm (5″ x 5″) |
Maximum PCB inspectable area | 1320.8mm x 1300.48mm (52″ x 51.2″) *Dual Stage Inspection with External Rotator |
Maximum PCB thickness | 10mm (393 mils) |
Minimum PCB thickness | 1.5mm (60 mils) |
PCB warp | <2mm downward, 1mm upwards (without PSP); <3mm downward, <1.5mm upwards (with PSP) |
Maximum PCB weight | 25kg |
Top Clearance of PCB | 50 mm @ 19 µm 31 mm @ 15 µm 14 mm @ 11 µm (Calculated from Board Top surface) |
Bottom Clearance of PCB | 80 mm |
PCB edge clearance | 10 mm |
100% Press-fit testability | Yes (With PSP2 / PSP2.1 feature) |
PCB Temperature | 40 Deg C |
Power and Environmental | |
Power Supplies | 200 – 240 VAC three phase; 380 – 415 VAC three phase wye (+/- 5) (50Hz or 60Hz) |
Air requirement | 828kPA (120psi) compressed air |
System footprint (Width X Depth X Height) | 3300mm x 3300mm x1990mm |
Total system weight | ~11000 kgs |
**Note: 1. Panels are handled on width edges. Panels with edge cut outs may require the use of a carrier. 2. Maximum panel size dimensions and weight must include carrier if applicable 3. Smaller panels are possible with the use of panel carriers. 4. With panels of this thickness, imaging results can be affected by PCBA layout. 5. Measured from the bottom of the panel including a maximum warp.*Note: 1. Assuming pad width is 50% of pitch. 2. The reported values for minimum feature detection assume that the feature is in a single plane of focus and that there are no X-ray absorbers in the X-ray path or in the immediate area of the feature other than those found in a typical multi-layer printed circuit board. #2×2 binning camera configuration. Hardware upgrade is required on old system. |
Accessories
Reviews & Comments
Please login to write review!