Twintex TFG 3620E, 20MHz, 02 out put, Arbitrary Function Generator
Twintex TFG 3620E, 20MHz, 02 out put, Arbitrary Function Generator
-
Frequency:
-
Sampling Rate:
-
Waveform Length:
-
Vertical Resolution:
- Please contact to check stock
- There are currently no promotions for this product
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
- Technical Counseling 100% Free
- Free Shipping For 3.000.000vnd Order
Data is being updated
Description
The TFG3600E series DDS arbitrary waveform generator is dual channel channel digital function generator based on DDS technology.The DDS digital function waveform generator is available with four models: 5MHz DDS Function generator, 10MHz DDS Function generator, 15MHz Function signal generator, Function generator 20MHz. The dual channel DDS function generator signal can be used as student function generator, DIY electronic kits function generator.
Features:
- Max. output frequency 5MHz/10MHz/15MHz/20MHz
- 2 output channels
- 3.5-inch TFT LCD display
- Direct Digital Synthesis technology (DDS)
- Sampling rate100Msa/s, vertical resolution 8 bit, waveform length 1024 points
- Arbitrary waveform function, 8 sets of users defined waveforms
- Output waveforms: 32 built-in waveforms and 8 sets of user defined waveforms
- 40 sets panel setting save & recall
- Min.1mV (50Ω) waveform output with good stability
- Modulations: FM, FSK, PSK, ASK
- Frequency sweep, burst, TTL output
- Over voltage protection, over current protection, short circuit protection, reverse voltage protection
- Standard parts: RS-232 interface, 200MHz frequency counter
- Optional parts: power amplifier
Specification:
Model | TFG-3605E | TFG-3610E | TFG-3615E | TFG-3620E |
Frequency range | 1μHz~5MHz | 1μHz ~10MHz | 1μHz ~15MHz | 1μHz ~20MHz |
Waveform (CHA) | ||||
Waveform types | 32 pre-stored waveforms and 8 user defined arbitrary waveforms including: Sine, Square, Triangle, Ramp, Pulse etc. | |||
Waveform length | 1024 points | |||
Vertical resolution | 8 bits | |||
Sampling rate | 100MSa/s | |||
Sine harmonic distortion | ≥40dBc (≥35dBc (1MHz~20MHz) | |||
Sine wave total distortion | ≤1% (20Hz~200kHz) | |||
Square wave | Rise/fall edge time: ≤35nsOvershoot: ≤10%Duty cycle: 1%~99% | |||
Frequency (CHA) | ||||
Frequency range | Sine wave: 1μHz~Max.frequency Square wave: 1μHz~5MHzOther waveforms: 1μHz~1MHz | |||
Resolution | 1μHz | |||
Accuracy | ±5×10-5 | |||
Stability | ±5×10-6/3hours | |||
Amplitude (CHA) | ||||
Amplitude range | 2mVpp~20Vpp, 1μHz~10MHz (high impedance)2mVpp~15Vpp, 10MHz~15MHz (high impedance)2mVpp~8Vpp, 15MHz~20MHz (high impedance) | |||
Resolution | 20mVpp (amplitude>2Vpp), 2mVpp (amplitude<2Vpp) | |||
Accuracy | ± (1%+2mVrms) (high impedance, RMS, frequency 1kHz) | |||
Stability | ±0.5% /3hours | |||
Flatness | ±5% (frequency of 10MHz or below ), ±10% (frequency above 10MHz) | |||
Output impedance | 50Ω | |||
DC Offset (CHA) | ||||
Offset range | ±10V (high impedance, attenuation 0 dB) | |||
Resolution | 20mVdc | |||
Accuracy | ±(1%+20mVdc) | |||
Sweep (CHA) | ||||
Sweep type | Frequency sweep, amplitude sweep | |||
Sweep range | Free to set starting point and end point | |||
Sweep step | Higher than any value of the resolution | |||
Sweep rate | 10ms~60ms/step | |||
Sweep direction | Up, Down, Up-Down | |||
Sweep mode | Linear, logarithmic | |||
Control mode | Auto sweep or manual sweep | |||
Frequency Modulation (FM) (CHA) | ||||
Carrier signal | CHA waveforms | |||
Modulation signal | Internal signal of CHB or External signal | |||
Modulation deviation | 0%~20% | |||
Burst (CHA) | ||||
Carrier signal | CHA signal | |||
Trigger signal | TTL_A signal | |||
Burst counts | 1~65000 cycles | |||
Burst mode | Internal TTL, External, Single | |||
Shift keying (CHA) | ||||
FSK | Free to set carrier waveform frequency and hopping frequency | |||
ASK | Free to set carrier waveform amplitude and hopping amplitude | |||
PSK | Hopping phase: 0~360°, Max. resolution: 1° | |||
Alternative rate | 10ms~60s | |||
CHB output characteristics | ||||
Waveform | 32 pre-stored waveforms and 8 user defined arbitrary waveforms including: Sine, Square, Triangle, Ramp, Pulse etc.Length: 1024 pointsSampling range : 12.5Msa/sAmplitude resolution : 8 bitsSquare wave duty cycle : 1%~99% | |||
Frequency | Range: Sine wave: 1μHz~1MHz; Other waveforms: 1μHz~100kHzResolution: 1μHzAccuracy: ±1×10-5 | |||
Amplitude | Range: 50mVpp~20Vpp (high impedance)Resolution: 20mVppOutput impedance : 50Ω | |||
Burst | Carrier signal: CHB signalTrigger signal: TTL_B signalBurst count : 1~65000 cyclesBurst mode : Internal TTL, External, Single | |||
TTL output | ||||
Waveform characteristics | Square wave, rise/fall time ≤20ns | |||
Frequency characteristics | 40mHz~1MHz | |||
Amplitude characteristics | TTL and CMOS compatible, low4V | |||
Frequency counter | ||||
Testing frequency range | 1Hz~200MHz | |||
Input signal amplitude | 100mVpp~20Vpp | |||
Remote control | RS-232 serial interface | |||
Power amplifier (optional) | ||||
Max. output power | 7W (8Ω), 1W (50Ω) | |||
Max. output voltage | 22Vpp | |||
Frequency bandwidth | 1Hz~200kHz | |||
General | ||||
Operation characteristics | Key operation for all functions, menu display, rotary dial adjustment | |||
Display | Display: TFT LCDLanguage: English, Chinese (simplified), Chinese (traditional) | |||
Power requirements | Power Requirements: AC220V (1±10%) / AC110V (1±10%)Frequency: 50Hz/60Hz(1±5%)Power Consumption: <45VA | |||
Environmental condition | Temperature: 0~40℃Humidity: <80% | |||
Standard accessories | Power cord ×1, Operation manual ×1, Software CD ×1, RS-232 cable ×1,BNC-BNC cable ×1, Test lead ×1 | |||
Dimension | 415×295×195mm | |||
Weight | 3.5kg |
[caption id="attachment_158418" align="alignnone" width="531"] Phu kien Twintex TFG 3620E [/caption]
Accessories
- Power cord ×1
- Operation manual ×1
- Software CD ×1
- RS-232 cable ×1
- BNC-BNC cable ×1
- Test lead ×1
Please login to write review!