Digital Oscilloscope LeCroy WaveJet 354T 500 MHz, 4 CH
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
- Technical Counseling 100% Free
- Free Shipping For 3.000.000vnd Order
Data is being updated
M áy hiện sóng LeCroy WaveJet 354T băng thông 500 MHz, 4 kênh, lấy mẫu 1 GSa/s, bộ nhớ 2.5 Mpts/kênh, màn hình cảm ứng 7.5 inch.
- 350 MHz and 500 MHz bandwidths
- Up to 2 GS/s sample rate
- Long Memory – up to 5 Mpts
- 7.5” touch screen display
- 26 measurement parameters
- Replay mode
- Standard Pass/Fail Mask and Measurement testing
- Standard I2C, SPI, and UART serial triggers
- Standard USB Host, USB Device, GPIB, and LAN connectivity
- Multi-language user-interface and help
- Ultra-quick boot time
Touch screen operation simplifies how all aspects of the oscilloscope are controlled, increasing productivity and decreasing setup time. Intuitively touch controls instead of navigating confusing soft keys.
Intricate signals can be quickly acquired by combining a long capture time with a variety of complex triggers, including triggers for I2C, SPI, and UART. Pass/fail mask and measurement testing enables deeper analysis and performs characterization and validation testing with ease. Scroll back in time to view previous waveforms and isolate anomalies using Replay mode.
The small form factor and light-weight design make it easy to carry and use anywhere. Coupled with an ultra-quick boot time, the WaveJet Touch is ready to use when needed. The WaveJet Touch is on and acquiring signals in less than 5 seconds, enabling measurements to begin immediately.
Easily document results by saving screenshots directly to a memory stick or printer. Standard GPIB, LAN, and USB connections enable easy remote control. Using Teledyne LeCroy’s WaveStudio the WaveJet Touch can quickly connect to a PC.
Long memory is critical for maintaining high sample rate during long data captures. The standard 5 Mpts of memory eliminates the tradeoff between long capture and high sample rate. The long memory makes the WaveJet Touch a great tool for viewing signals that have low frequency and high frequency components. The built-in zoom function provides an easy way to get a close look at all of the signal details.
Equipped with a variety of complex triggers, the WaveJet Touch can easily capture intricate signals. Standard I2C, SPI, and UART triggers allow for comprehensive protocol debug. A pattern logic trigger can trigger the oscilloscope depending upon the state of the four channel inputs.
Waveforms can be tested against a mask or measurement parameters can be assigned pass/fail criteria for validation testing. On a pass/fail condition the oscilloscope can be configured to: stop the acquisition, beep, save the waveform, take a screen capture or output a pulse to another instrument.
Math operators include basic arithmetic functions and advanced FFT, derivative, and integral functions. Advanced math can be performed on the results of basic math functions. The scaling and offset of the math trace can easily be adjusted with its own dedicated knobs.
Scroll back in time using Replay mode to view previous waveforms and isolate anomalies. Use cursors and measurement parameters to quickly find the source of problems. Replay mode is always active so there is no need to worry about turning it on.
In addition to normal sampling, the high resolution, peak detect, and average acquisition modes make it easy to capture a wide range of signal types. An Equivalent time sampling rate of 100 GS/s allows for reconstruction of repetitive signal with extreme precision.
Measure waveforms with up to 26 different automatic parameters and min/max statistics. Display up to four measurements simultaneously. All instance measurements allow the oscilloscope to measure all occurrences of a parameter in a single acquisition.
Vertical System | |
Rise time | 750 ps |
Bandwidth | 500 MHz |
Input Channels | 4 |
Bandwidth Limiters | 200 kHz, 2 MHz, 20 MHz, 100 MHz |
Input Impedance | 1 MΩ ± 1.0% || 16 pF, 50 Ω ± 1.0% |
Input Coupling | AC, DC, GND |
Maximum Input Voltage | 1 MΩ: ± 400 Vpk CAT I, 50 Ω: 5 VRMS |
Channel-Channel Isolation | ≥ 40 dB from DC - 100 MHz ≥ 30 dB at 500 MHz |
Vertical Resolution | 8 bits |
Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 2 V/div |
DC Gain Accuracy | ±(1.5% + 0.5% of Full Scale) |
Offset Range | ±1 V: 2 mV/div - 50 mV/div ±10 V: 50.2 mV/div - 500 mV/div ±100 V: 502 mV/div - 10 V/div |
Horizontal System | |
Time/Division Range | 500 ps/div - 50 s/div |
Clock Accuracy | 10 ppm |
Trigger and Interpolator Jitter | 150 ps (pk-pk) |
Acquisition System | |
Single-Shot Sample Rate/Ch | 2 GS/s on 2 Ch 1 GS/s on 4 Ch |
Equivalent Sample Rate | 100 GS/s |
Memory | 5 Mpts/Ch on 2 Ch 2.5 Mpts/Ch on 4 Ch |
Acquisition Modes | |
Averaging | Selectable Number of Sweeps: 2 - 65536 (in powers of 2) |
Peak Detect | 1 ns |
Interpolation | Linear |
Enhanced Resolution | Up to 12 bits |
Triggering System | |
Modes | Normal, Auto, Single, Stop |
Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
Coupling Mode | AC, DC, LF Rej, HF Rej, Noise Reject |
Hold-off by Time or Events | 200 ns - 50 s |
Internal Trigger Range | ±5 divisions from center |
Trigger Sensitivity | 0.5 division: DC - 10 MHz 1.0 division: 10 MHz - 250 MHz 1.5 divisions: 250 MHz - 500 MHz |
External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 100 mV from 10 MHz to 250 MHz 150 mV from 250 MHz to 500 MHz Ext/10: 0.5 V from DC to 10 MHz 1.0 V from 10 MHz to 250 MHz 1.5 V from 250 MHz to 500 MHz |
External Trigger Input Range | Ext: ±0.5 V, EXT/10: ±5.0 V |
Display | |
Type | Color Touch Screen 7.5" TFT-LCD |
Resolution | VGA: 640 x 480 |
Grid Styles | YT, XY |
Trigger Types | |
Standard Triggers | Edge, Edge ALT, Edge OR, Pulse Width, Period, Pulse Count, Dropout, TV, Logic, I2C, SPI, UART |
Internal Storage | |
Waveform Storage | 1 reference waveform |
Setup Storage | 5 setups |
Math | |
Number of Math Traces | 1 |
Standard Math Functions | Add, Subtract, Multiply, FFT, Derivative, Integral |
Measurements | |
Number of Measurements Displayed | 4 |
Measurement Parameters | Base, Cyclical Mean, Cyclical RMS, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Integral, Maximum, Mean, Minimum, Number of +Pulses, Number of -Pulses, +Overshoot, -Overshoot, Peak-Peak, Period, +Pulse Width, -Pulse Width, Rise Time (20% - 80%), Rise Time (10% - 90%), RMS, Skew, Skew@level, Top, Top-Base |
Interface | |
GPIB Port | 1 |
USB (Device) | 1 |
Ethernet Port | 1 |
USB (Host) | 1 |
Probes | |
Probes | Qty. (4) ÷10 Passive Probes |
Scale Factors | Automatic: ÷1, ÷10, ÷100, ÷1000 Manual: ÷1, ÷5, ÷10, ÷20, ÷50, ÷100, ÷200, ÷500, ÷1000, ÷2000 |
Calibration Output | 1 kHz square wave, 3 Vp-p (typical), output to probe hook |
Power Requirements | |
Voltage | 100 - 240 VAC (± 10%) at 50 / 60 Hz (± 5%) 100 - 120 VAC (± 10%) at 400 Hz (± 5%) |
Max. Power Consumption | 50 W |
Environmental and Safety | |
Temperature (Operating) | 0 °C to 40 °C |
Temperature (Non-Operating) | -20 °C to 60 °C |
Humidity (Operating) | 80% RH, 40 °C |
Humidity (Non-Operating) | 80% RH, 40 °C |
Altitude (Operating) | 3,000 m max at <=25 °C |
Altitude (Non-Operating) | 12,192 m |
Physical Dimensions | |
Dimensions (HWD) | 190 mm x 330 mm x 124 mm (7.5" x 13" x 4.9") |
Weight | 3.7 kg (8.6 lbs) |
Accessories
Please login to write review!