Digital Oscilloscope GW Instek GDS1102A-U, 100MHz, 2 channel, 1GSa/s
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
- Technical Counseling 100% Free
- Free Shipping For 3.000.000vnd Order
Data is being updated
Osilloscope GW Instek GDS-1102A-U băng thông 100 MHz, lấy mẫu 1 GSa/s, 2 kênh, bộ nhớ 2 Mpts/kênh, màn hình 5.7 inch.
- 2 Channel 100 MHz Bandwidth
- 1 GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time
- 2 Mega Point Record Length
- 2mV~10V Vertical Scale
- 1ns~50s Horizontal Range
- Up to 27 Automatic Measurements
- 5.7" TFT LCD Display
- USB Host and Device Interface Supported
- Go/NoGo Function
- Data Logger
- Limited Lifetime Warranty
VERTICAL | |
Channels | 2 |
Bandwidth | DC~100MHz(-3dB) |
Rise Time | <3.5ns Approx. |
Sensitivity | 2mV/div ~ 10V/div (1-2-5 increments) |
Accuracy | ±(3% x |Readout| + 0.1 div + 1mV) |
Input Coupling | AC, DC & Ground |
Input Impedance | 1MΩ±2%, ~15pF |
Polarity | Normal & Invert |
Maximum Input | 300V (DC+AC peak), CATII |
Waveform Signal Process | + , - , x, FFT, FFTrms ,Zoom FFT |
Offset Range | 2mV/div ~ 50mV/div: ±0.4V 100mV/div ~ 500mV/div: ±4V 1V/div ~ 5V/div: ±40V 10V/div: ±300V |
Bandwidth Limit | 20MHz (-3dB) |
TRIGGER | |
Sources | CH1 , CH2 , Line , EXT |
Modes | Auto, Normal, Single, TV, Edge, Pulse Width |
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. |
Sensitivity | DC ~ 25MHz: Approx. 0.5div or 5mV; 25MHz ~ 70/100/150MHz: Approx. 1.5div or 15mV |
EXT TRIGGER | |
Range | ±15V |
Sensitivity | DC ~ 25MHz : ~ 50mV ; 25M ~ 70/100/150MHz : ~15mV |
Input Impedance | 1MΩ±2% , ~ 15pF |
Maximum Input | 300V (DC AC peak) , CATII |
HORIZONTAL | |
Range | 1ns/div ~ 50s/div (1-2.5-5 increments); ROLL : 50ms/div ~ 50s/div |
Modes | Main, Window, Window Zoom, Roll, X-Y |
Accuracy | ±0.01% |
Pre-Trigger | 10 div maximum |
Post-Trigger | 1000 div |
X-Y MODE | |
X-Axis Input | Channel 1 |
Y-Axis Input | Channel 2 |
Phase Shift | ±3°at 100kHz |
SIGNAL ACQUISITION | |
Real-Time Sample Rate | 1GSa/s maximum |
Equivalent Sample Rate | 25GSa/s maximum |
Vertical Resolution | 8 Bits |
2 Mega Points maximum | |
Acquisition Mode | Normal, Peak Detect, Average |
Peak Detection | 10ns (500ns/div ~ 10s/div) |
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
CURSORS AND MEASUREMENT | |
Voltage Measurement | Vpp ,Vamp ,Vavg ,Vrms ,Vhi ,Vlo ,Vmax ,Vmin ,Rise Preshoot/Overshoot ,Fall Preshoot/Overshoot |
Time Measurement | Freq ,Period ,Rise Time ,Fall Time ,Positive Width ,Negative Width ,Duty Cycle |
Cursors Measurement | Voltage difference between cursors (V) Time difference between cursors (T) |
Auto Counter | Resolution : 6 digits Accuracy: 2% Signal Source: All available trigger source except the Video trigger mode |
ADJUSTABLE PROBE COMPENSATION SIGNAL | |
Frequency Range | 1kHz ~ 100kHz, 1kHz/STEP |
Duty Cycle Range | 5% ~ 95%, 5%/STEP |
CONTROL PANEL FUNCTION | |
Autoset | Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically |
Save Setup | Up to 15 sets of measurement conditions |
Save Waveform | 15 sets of waveform |
DISPLAY | |
TFT LCD Type | 5.7 inch |
Display Resolution | 234(Vertically) x 320(Horizontally) Dots |
Display Graticule | 8 x 10 divisions |
Display Brightness | Adjustable |
INTERFACE | |
USB Device | USB1.1 & 2.0 full speed compatible |
USB Host | Image (BMP), waveform data (CSV), and setup (SET) |
POWER SOURCE | |
Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
MISCELLANEOUS | |
Multi-Language Menu | Available |
Onscreen Help | Available |
DIMENSIONS & WEIGHT | |
User manual x 1, Power Cord x 1 Probe GTP-070A-4 or equivalent : 70MHz (10:1/1:1) Switchable passive probe for GDS-1072A-U (one per channel) Probe GTP-100A-4 or equivalent : 100MHz (10:1/1:1) Switchable passive probe for GDS-1102A-U (one per channel) Probe GTP-150A-2 or equivalent : 150MHz (10:1/1:1) Switchable passive probe for GDS-1152A-U (one per channel) Optional Accessories GSC-006 Soft carrying case GTL-110 Test lead, BNC-BNC heads GTL-242 USB 2.0 A-B type cable
Accessories
Please login to write review!