Digital Oscilloscope GW Instek GDS-1072-U, 70MHz, 02 channel

Digital Oscilloscope GW Instek GDS-1072-U, 70MHz, 02 channel

SKU:
GDS-1072-U
Brand:
Warranty:
N/A
Price: Contact
  • Please contact to check stock
  • There are currently no promotions for this product

Hotline: +84 906 988 447  

Head Office: Ho Chi Minh City

  • Tel: +84 2839 778 269 / 3601 6797
  • Email: sales@lidinco.com
  • Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam

Office: Bac Ninh City

  • Tel: +84 222 730 0180
  • Email: bn@lidinco.com
  • Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
  • Counseling Technical Counseling 100% Free
  • Shipping Free Shipping For 3.000.000vnd Order
Specification

Data is being updated

GDS-1102-U

Máy hiện sóng GWInstek GDS-1072-U băng thông 70 MHz, lấy mẫu 250 MSa/s, 2 kênh, bộ nhớ 4 kpts/kênh, màn hình 5.7 inch.

The GDS-1000-U Series offers 100MHz, 70MHz and 50MHz digital storage oscilloscopes with 5.7" color TFT LCD displays. With dual sampling modes, a 4,000 point record length, a real-time sampling rate of 250MSa/s and an ET sampling rate of 25GSa/s, the GDS-1000-U Series DSO provides an excellent balance of performance between memory length and sampling speed. Other major features include user-friendly menu tree operations, compact size, ergonomic design, USB host for PC connectivity and USB device port support. The GDS-1000-U Series is designed to meet today's most demanding engineering requirements and budgets.

USB Interface & Data Logger

The USB Host port on the front significantly enhance the data storage capability of the product. The large amount of data, including screenshot, waveform and panel setup, could be easily stored into a popular flash disk. A USB device port on the rear of the product transfers the screen image and waveform raw data to PC — and also allows your PC to remotely control the GDS-1072-U DSO.

Waveform Saving & Automatic Measurement

A total of 15 waveforms can be saved into memory to be displayed at a later time. Two saved reference waveforms and two live waveforms can be compared on the screen at the same time. All signal time and voltage related measurements can be shown on the screen simultaneously in real-time via the Measure key press.

Enhanced Calibration Signal Output

The GDS-1072-U has an enhanced 1kHz calibration signal. Its output frequency is adjustable from 1 kHz to 100 kHz and has an adjustable duty cycle of 5% to 95%. Due to the flexible output, the calibration output can also be used as a basic signal generator for other applications.

Autoset Disable Function

For educational purposes, instructors might not want to use the Autoset function on the DSO when they are teaching how to use oscilloscopes. On the GDS-1000-U Series, the Autoset function can be disabled, allowing students to manually operate the oscilloscope functions to further enrich their learning experience.

Go/NoGo Function

Go/NoGo testing function check whether the incoming signal violates the user-defined template. Users can easily define this template by setting the tolerance ratio to determine violation conditions. Go/NoGo testing can either keep counting violation number or stop testing when violation conditions are met.

Freewave PC Software

Freewave DSO remote control and monitoring software is fully supported for the GDS-1072-U series DSOs and is available free of charge from the GW Instek website. Freewave lets you remotely monitor the DSO, capture waveform data or even capture screenshots. Via a USB connection, Freewave is able to provide near-realtime monitoring and control. Flexible saving options allow you to capture data for later analysis and observation. Screen images can be captured to bitmap or jpeg formats. Waveform data can be saved to CSV for spreadsheet manipulation or computer analysis. Waveforms can also be saved as AVI movies to observe signal variation over time.

VERTICAL
Channels
2
 
Bandwidth
DC ~ 70MHz (-3dB)
 
Rise Time
<5ns Approx.
 
Sensitivity2mV/div ~ 10V/div (1-2-5 increments)
Accuracy±(3% x |Readout|+0.1 div + 1mV)
Input CouplingAC, DC & Ground
Input Impedance1M±2%, ~15pF
PolarityNormal & Invert
Maximum Input300V (DC+AC peak), CATII
Waveform Signal Process+ , - , FFT
Offset Range2mV/div ~ 50mV/div : ±0.4V , 10mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V , 10V/div:±300V
Bandwidth Limit20MHz (-3dB)
TRIGGER
SourcesCH1 , CH2 , Line , EXT
ModesAuto, Normal, Single, TV, Edge, Pulse Width
CouplingAC , DC , LF rej. , HF rej. , Noise rej.
SensitivityDC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~50/70/ 100MHz: Approx. 1.5div or 15mV
EXT TRIGGER
Range±15V
SensitivityDC ~ 25MHz : ~ 50mV ; 25M ~ 50/70/100MHz : ~15mV
Input Impedance1MΩ±2% , ~ 16pF
Maximum Input300V (DC AC peak) , CATII
HORIZONTAL
Range1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 50ms/div ~ 50s/div
ModesMain, Window, Window Zoom, Roll, X-Y
Accuracy±0.01%
Pre-Trigger10 div maximum
Post-Trigger1000 div
X-Y MODE
X-Axis InputChannel 1
Y-Axis InputChannel 2
Phase Shift±3° at 100kHz
SIGNAL ACQUISITION
Real-Time Sample Rate250MSa/s maximum
Equivalent Sample Rate25GSa/s maximum
Vertical Resolution8 Bits
Record Length4K Dots maximum
Acquisition ModeNormal, Peak Detect, Average
Peak Detection10ns (500ns/div ~ 10s/div)
Average2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
CURSORS AND MEASUREMENT
Voltage MeasurementVpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot
Time MeasurementFreq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Cursors MeasurementVoltage difference between cursors (ΔV) Time difference between cursors (ΔT)
Auto CounterResolution : 6 digits Accuracy : ±2% Signal Source: All available trigger source except the Video trigger mode
CONTROL PANEL FUNCTION
AutosetAutomatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level
Save SetupUp to 15 sets of measurement conditions
Save Waveform15 sets of waveform
DISPLAY
TFT LCD Type5.7 inch
Display Resolution234 (Vertically) x 320 (Horizontally) Dots
Display Graticule8 x 10 divisions
Display BrightnessAdjustable
INTERFACE
USB Slave ConnectorUSB1.1 & 2.0 full speed compatible (printers and flash disk not supported)
USB HostImage (BMP), waveform data (CSV), and setup (SET)
POWER SOURCE
Line Voltage RangeAC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
MISCELLANEOUS
Multi-Language MenuAvailable
Online HelpAvailable
Go/NoGo FunctionAvailable
Data LoggerAvailable
DIMENSIONS & WEIGHT 
 310(W) x 142(H) x 140(D)mm; Approx. 2.5kg

User manual x 1, Power Cord x 1 Probe-GTP-070A-4 : 70MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1052-U (one per channel) Probe-GTP-070A-2 : 70MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1072-U (one per channel) Probe-GTP-100A-2 : 100MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1102-U (one per channel) Optional Accessories GSC-006 Soft carrying case GTL-110 Test lead, BNC-BNC heads GTL-242 USB 2.0 A-B type cable

Accessories

Handheld Insulation Resistance Tester Keysight U1453A

Contact

Series Handheld Insulation Resistance Tester Keysight U1461A

Contact

Fusion Splicer Ilsintech Swift K7, Core to Core

Contact

Máy cắt mẫu đĩa kim cương Top Tech PRECISO-CH SERIES CH75

Contact

Programmable AC/DC Withstand Voltage Tester UCE UC8801

Contact

Dual Measurement Multimeter GW Instek GDM-8352

Contact

Function Generator Gwinstek GFG-8255A

Contact

Function Generator Gwinstek GFG-8250A

Contact

Function Generator Gwinstek GFG-8219A

Contact

Function Generator Gwinstek GFG-8217A

Contact

Function Generator Gwinstek GFG-8216A

Contact

Function Generator Gwinstek GFG-8215A

Contact
Reviews & Comments

0.0/5

(0 ratings)
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0

Please login to write review!

Review about this product: