Máy phát xung Pulse Tektronix PSPL10060A

Name: Máy phát xung Pulse Tektronix PSPL10060A
Brand: Tektronix
SKU: PSPL10060A
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

Mã:

PSPL10060A

0 đánh giá

Thương hiệu:

Tektronix

Bảo hành:

N/A

Giá: Liên hệ

Vui lòng liên hệ để kiểm tra tình trạng kho

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Dữ liệu đang được cập nhật

Mô tả sản phẩm
Phụ kiện

Máy phát xung Pulse Tektronix dễ dàng điều khiển bằng tay hoặc máy tính với độ chuẩn tín hiệu cao và nhanh chóng.

Các thông số chính

Pulse amplitudes from 7.5 to 10 V
10 V fixed amplitude, PSPL10050A
900 µV to 10 V, PSPL10060A
700 µV to 7.5 V, PSPL10070A
Rise times from 65 ps down to 45 ps
Adjustable duration from 100 ps to 10 ns
Single shot, or 1 Hz to 100 kHz repetition rate

Các tính năng chính

Keypad interface
Programmable IEEE-488
Internal, external, manual, or GPIB trigger modes
Gated output

Các ứng dụng

University education and research
UWB signal source
Semiconductor characterization
Laser driver

Hiệu Suất

Rise time for the PSPL10050A at 2 V/div and 20 ps/div

Adjustable duration for the PSPL10050A at 2 V/div and 200 ps/div

Rise time for the PSPL10060A at 2 V/div and 20 ps/div

Adjustable duration for the PSPL10060A at 2 V/div and 100 ps/div

Rise time for the PSPL10070A at 1.2 V/div and 20 ps/div

Adjustable duration for the PSPL10070A at 1.2 V/div and 200 ps/div

Parameter	PSPL10050A	PSPL10060A	PSPL10070A
Amplitude into 50 Ω^{(See Notes)}	10 V (fixed)	900 μV to 10 V, adjustable in 1 dB steps	±700 μV to ±7.5 V, adjustable in 1 dB steps
Amplitude accuracy, into 50 Ω	± 0.2 V
Polarity	Positive only	Positive only	Positive or negative
Baseline	0 V	0 V	-5 V to +5 V in 1.25 mV steps
Transition time, leading edge (10 – 90%) (20 – 80%)	≤45 ps typ, ≤55 ps max ---	≤55 ps typ, ≤65 ps max ---	≤65 ps typ, ≤75 ps max ≤40 ps typ, ≤50 ps max
Transition time, trailing edge (10 – 90%) (20 – 80%)	≤110 ps typ, ≤130 ps max ---	≤115 ps typ ---	--- ≤80 ps typ ≤100 ps max
Reflection coefficient	±5% during pulse +80%, -40% after pulse	±5% during pulse +80%, -40% after pulse (improves with increasing atten.)	50% @ 0 dB (7.5 V) 20% @ 6 dB (3.7 V) -10 % @ > 10 dB (< 2.3 V)
Source impedance (nominal)	50 Ω
Duration (FWHM) ^{(See Notes)}	100 ps to 10 ns in 2.5 ps steps
Baseline precursor	< 1%
Topline overshoot	< 4%
Topline perturbations	< ±3% for t < 2 ns
Topline flatness	< ±0.5% for 2 ns < t < 10 ns

Notes: The duration and delay values displayed on the front panel LCD and programmed over the GPIB are only to be considered “nominal” values and not absolute values. The duration and delay parameters do exhibit some thermal drift, rep rate dependency and interaction. There will be some loss in amplitude at minimum pulse durations. The amplitude tolerance of ±0.2 V holds only for > 2 ns durations. Always use an oscilloscope as an independent check of these pulse parameters. The instrument is adjusted and calibrated at the factory in an ambient temperature of 23 °C (±3 °C) at a rep. rate of 100 kHz. The instrument will operate over a temperature range of 0 to 50 °C but will not meet all specifications over this range.

Trigger and timing

The performance parameters listed in this table are typical values; parameters are guaranteed only when maximum and/or minimum limits are given.

Parameter	PSPL10050A	PSPL10060A	PSPL10070A
Trigger in/out delay	90 ns	90 ns	100 ns
Repetition rate	1 Hz to 100 kHz
Period	10 µs to 1 s, 0.1 µs steps
Trigger mode	Internal, external, manual, or GPIB
External trigger input level	-2 to +2 V, 1 mV steps, positive or negative slope
Maximum external trigger input	±5 V
External trigger impedance	50 Ω
Trigger output into 50 Ω	2.4 V, 50 ns
Delay ^{(See Notes above)}	0 to 63 ns, 1 ns steps
Delay jitter, RMS	1.5 ps
External trigger jitter, RMS	5 ps (<1 ns rise)
External gate input	TTL, >2 V on, <0.5 V off
External gate impedance	50 Ω

General specifications

Parameter	PSPL10050A	PSPL10060A	PSPL10070A
Accessories included	Remote Pulse Head & 4 ft coaxial cable, power cord, rack mount kit, instruction manual	Power cord, rack mount kit, instruction manual	Power cord, rack mount kit, instruction manual
Controls	Power, menu, data entry, disable/enable, local and manual trigger
Power supply (mains)	100, 115, or 230 VAC, ±10% switch selectable, 50 or 60 Hz
Power consumption	48 VA (60 Hz), 65 VA (50 Hz)
Operating environment ^{(See Notes above)}
Temperature	40 °C (104 °F); low limit of 0 °C (32 °F)
Humidity	80% for temperatures up to 31 °C (88 °F), decreasing linearly to 50% at 40 °C (104 °F)
Elevation	2000 m (6562 ft.)
Dimensions	19.0 x 15.2 x 5.5 in. (48.3 x 38.6 x 14.0 cm)
Weight	21 lbs (9.5 kg)
Connectors	SMA output, BNC trig in, gate in, trig out, GPIB on rear panel
GPIB standard	IEEE-488.1-1987
GPIB interface functions	SH1, AH1, T6, L4, SR1, RL1, PPO, DC1, DT1, CO and E2.
Set up	Save/recall in 10 memories with battery back up
Warranty	One year